To study the dependence of current on the potential difference with graph

---

Aim

To study the dependence of current (I) on the potential difference (V) across a resistor and determine its resistance. Also plot a graph between V and I.

Materials Required

• Battery eliminator
• Ammeter
• Voltmeter
• Rheostat
• One way plug key
• Resistor
• Connecting wires

Theory

Ohm’s Law:

At constant temperature, the potential difference (V) across a conductor is directly proportional to the current (I) flowing through it.
Mathematically,
V ∝ I
or V = IR
or R = V/I
Where, R is constant of proportionality and is known as resistance.

Factors affecting resistance:

• Length of the conductor (R ∝ l)
• Cross-section area of the conductor (R ∝ 1/A)
• Nature of the material

Circuit Diagram

Procedure

1. Setup the devices as shown in the circuit diagram.
2. Note the least count of the ammeter and the voltmeter.
3. Plug the key on the battery eliminator and adjust the rheostat by sliding its variable terminal till the ammeter and the voltmeter show a reading.
4. Note the readings of voltmeter and ammeter. Take out the plug or switch off the battery eliminator for a moment.
5. Repeat the steps 3 and 4 for the different values of current by varying the sliding terminal of rheostat.
6. Calculate resistance using formula R = V/I.
7. Plot a graph by taking I along y-axis and V along x-axis or vice-versa.

Observation Table

A. Least count and range of voltmeter and ammeter

	Voltmeter	Ammeter
Range	0 – 0.1 V	0 – 0.5 A
Least Count	0.01 V	0.01 A

B. Readings of voltmeter and ammeter

S.No.	Potential difference (V)	Current (I)	Resistance R = V/I
1.	0.04 V	0.02 A	R1 = 2 Ω
2.	0.06 V	0.03 A	R2 = 2 Ω
3.	0.08 V	0.04 A	R3 = 2 Ω

*These observations may be different for different voltmeter, ammeter and resistors.

Calculation

Mean value of R = = = 2 Ω

Graph

Conclusions

1. For all the three readings, the R-value is the same and constant.
2. The ratio of potential difference V and current I is the resistance of a resistor.
3. With the help of the graph between V and I, Ohm’s law is verified as the plot is a straight line.

Precautions

1. Thick copper wires should be used as connecting wires and using sandpaper, their insulation should be removed.
2. The connections should be tight.
3. Voltmeter should be connected in parallel with the resistor.
4. To avoid unnecessary heating in the circuit, the current should be passed for a short time.

---

Class 10 Electricity Notes Class 10 Electricity Previous Years Questions Class 10 Electricity Important Questions

---

Class 10 Physics Practicals

• To study the dependence of current on the potential difference with graph
• Determination of equivalent resistance of two resistors when connected in series
• Determination of equivalent resistance of two resistors when connected in parallel
• Determination of the focal length of Concave mirror by obtaining the image of a distant object
• Determination of the focal length of Convex lens by obtaining the image of a distant object
• Tracing the path of a ray of light passing through a rectangular glass slab for different angles of incidence
• Tracing the path of the rays of light through a glass prism

Class 10 Chemistry Practicals

• Finding the pH of the samples by using pH paper/universal indicator
• Studying the properties of acids and bases (HCl & NaOH) on the basis of their reaction
• Performing and observing the reactions and classifying them into: i. Combination reaction, ii. Decomposition reaction, iii. Displacement reaction and iv. Double displacement reaction
• Observing the action of Zn, Fe, Cu and Al metals on the salt solutions
• Studying the properties of acetic acid (ethanoic acid)
• Studying saponification reaction for preparation of soap
• Studying the comparative cleaning capacity of a sample of soap in soft and hard water

Class 10 Biology Practicals

• Preparing a temporary mount of a leaf peel to show stomata
• Showing experimentally that light is necessary for photosynthesis
• Experimentally show that carbon dioxide is given out during respiration
• Studying (a) binary fission in Amoeba, and (b) budding in yeast with the help of prepared slides
• Studying homology and analogy with the help of models/charts of animals and models/charts/specimens of plants
• Identification of the different parts of an embryo of a dicot seed (Pea, gram or red kidney bean)